The Precautions of Laster Engraver and Cutter

Laser engraver and cutter with laser beam,can engrave and cut a variety of material.

1. Laser engraver and machine should be used whenever possible in a clean, 10 ℃ -35 ℃ environment, keep the optics dry and dust-free. Usually we need to ensure that a separate enclosed workplace, to ensure that the indoor temperature, the ground have to paint or tiles, installation of air conditioning.

2. The provision of equipment our main power lines must be installed on an air switch, in order to make the protection, prohibited the use of triangular plug.

3. The customer shall be provided with a main power ground, non-virtual connection!

4. The circulating cooling water tank is preferable to use deionized water, the absence of deionized water, distilled water can be used in place; circulating cooling water use for some time should be promptly replaced (at least two weeks is recommended change the water), so as not to affect the efficiency of the laser .